>>>  [Device Install (DiShowUpdateDevice) - USB\VID_2341&PID_0043\75232303135351F03230]
>>>  Section start 2013/01/18 20:49:25.726
      cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
     dvi: {DIF_UPDATEDRIVER_UI} 20:49:25.729
     dvi:      No class installer for 'δ֪'
     dvi:      No CoInstallers found
     dvi:      Default installer: Enter 20:49:25.738
     dvi:      Default installer: Exit
     dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 20:49:25.742
     ndv: {Update Driver Software Wizard for USB\VID_2341&PID_0043\75232303135351F03230}
     inf:      Opened INF: 'g:\drivers\arduino uno rev3.inf' ([strings])
     inf:      {SetupCopyOEMInf: g:\drivers\arduino uno rev3.inf} 20:49:33.079
!    inf:           Package was already in store: skipping Driver Store add
     inf:           Driver Store location: C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf
     inf:           Published Inf Path: C:\Windows\INF\oem74.inf
     inf:           OEM source media location: g:\drivers\
     inf:      {SetupCopyOEMInf exit (0x00000000)} 20:49:33.148
     dvi:      Searching for hardware ID(s):
     dvi:           usb\vid_2341&pid_0043&rev_0001
     dvi:           usb\vid_2341&pid_0043
     dvi:      Searching for compatible ID(s):
     dvi:           usb\class_02&subclass_02&prot_01
     dvi:           usb\class_02&subclass_02
     dvi:           usb\class_02
     inf:      Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf' ([strings])
     sig:      {_VERIFY_FILE_SIGNATURE} 20:49:33.168
     sig:           Key      = arduino uno rev3.inf
     sig:           FilePath = C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf
     sig:           Catalog  = C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\CDC_vista.cat
!    sig:           Verifying file against specific (valid) catalog failed! (0x00000057)
!    sig:           Error 87: The parameter is incorrect.
     sig:      {_VERIFY_FILE_SIGNATURE exit(0x00000057)} 20:49:33.180
     sig:      {_VERIFY_FILE_SIGNATURE} 20:49:33.181
     sig:           Key      = arduino uno rev3.inf
     sig:           FilePath = C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf
     sig:           Catalog  = C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\CDC_vista.cat
!    sig:           Verifying file against specific Authenticode(tm) catalog failed! (0x80092003)
!    sig:           Error 0x80092003: An error occurred while reading or writing to a file.
     sig:      {_VERIFY_FILE_SIGNATURE exit(0x80092003)} 20:49:33.189
     dvi:      Selected driver installs from section [DriverInstall] in 'c:\windows\system32\driverstore\filerepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf'.
     dvi:      Class GUID of device changed to: {4d36e978-e325-11ce-bfc1-08002be10318}.
     dvi:      Set selected driver complete.
     dvi:      {Plug and Play Service: Device Install for USB\VID_2341&PID_0043\75232303135351F03230}
     ump:           Creating Install Process: DrvInst.exe 20:49:33.202
     ndv:           Infpath=C:\Windows\INF\oem74.inf
     ndv:           DriverNodeName=arduino uno rev3.inf:DeviceList:DriverInstall:5.1.2600.0:usb\vid_2341&pid_0043
     ndv:           DriverStorepath=C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf
     ndv:           Building driver list from driver node strong name...
     dvi:           Searching for hardware ID(s):
     dvi:                usb\vid_2341&pid_0043&rev_0001
     dvi:                usb\vid_2341&pid_0043
     dvi:           Searching for compatible ID(s):
     dvi:                usb\class_02&subclass_02&prot_01
     dvi:                usb\class_02&subclass_02
     dvi:                usb\class_02
     inf:           Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf' ([strings])
     sig:           {_VERIFY_FILE_SIGNATURE} 20:49:33.291
     sig:                Key      = arduino uno rev3.inf
     sig:                FilePath = C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf
     sig:                Catalog  = C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\CDC_vista.cat
!    sig:                Verifying file against specific (valid) catalog failed! (0x00000057)
!    sig:                Error 87: The parameter is incorrect.
     sig:           {_VERIFY_FILE_SIGNATURE exit(0x00000057)} 20:49:33.324
     sig:           {_VERIFY_FILE_SIGNATURE} 20:49:33.326
     sig:                Key      = arduino uno rev3.inf
     sig:                FilePath = C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf
     sig:                Catalog  = C:\Windows\System32\DriverStore\FileRepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\CDC_vista.cat
!    sig:                Verifying file against specific Authenticode(tm) catalog failed! (0x80092003)
!    sig:                Error 0x80092003: An error occurred while reading or writing to a file.
     sig:           {_VERIFY_FILE_SIGNATURE exit(0x80092003)} 20:49:33.335
     dvi:           Selected driver installs from section [DriverInstall] in 'c:\windows\system32\driverstore\filerepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf'.
     dvi:           Class GUID of device changed to: {4d36e978-e325-11ce-bfc1-08002be10318}.
     dvi:           Set selected driver complete.
     ndv:           {Core Device Install} 20:49:33.343
     inf:                Opened PNF: 'C:\Windows\INF\oem74.inf' ([strings])
     dvi:                {DIF_ALLOW_INSTALL} 20:49:33.362
     dvi:                     Using exported function 'PortsClassInstaller' in module 'C:\Windows\system32\MsPorts.Dll'.
     dvi:                     Class installer == MsPorts.Dll,PortsClassInstaller
     dvi:                     No CoInstallers found
     dvi:                     Class installer: Enter 20:49:33.370
     dvi:                     Class installer: Exit
     dvi:                     Default installer: Enter 20:49:33.373
     dvi:                     Default installer: Exit
     dvi:                {DIF_ALLOW_INSTALL - exit(0xe000020e)} 20:49:33.376
     ndv:                Installing files...
     dvi:                {DIF_INSTALLDEVICEFILES} 20:49:33.380
     dvi:                     Class installer: Enter 20:49:33.381
     dvi:                     Class installer: Exit
     dvi:                     Default installer: Enter 20:49:33.384
     dvi:                          {Install FILES}
     inf:                               Opened PNF: 'c:\windows\system32\driverstore\filerepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf' ([strings])
     inf:                               {Install Inf Section [DriverInstall.NT]}
     inf:                                    CopyFiles=DriverCopyFiles.nt  (arduino uno rev3.inf line 28)
     cpy:                                    Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
     flq:                                    QueueSingleCopy...
     flq:                                    Inf     : 'c:\windows\system32\driverstore\filerepository\arduino uno rev3.inf_x86_neutral_65ebaae8c82d2ccd\arduino uno rev3.inf'
!    flq:                                    Missing SourceDisksFiles/SourceDisksNames information from INF.
!    flq:                                    Default INBOX source locations pulled from pre-built DrvIndex
     flq:                                    SourceRootPath: 'C:\Windows\System32\DriverStore\FileRepository\mdmcpq.inf_x86_neutral_9f203c20b6f0dabd'
     flq:                                    {FILE_QUEUE_COPY}
     flq:                                         CopyStyle      - 0x00002000
     flq:                                         {FILE_QUEUE_COPY}
     flq:                                              CopyStyle      - 0x00002000
     flq:                                              SourceRootPath - 'C:\Windows\System32\DriverStore\FileRepository\mdmcpq.inf_x86_neutral_9f203c20b6f0dabd'
     flq:                                              SourcePath     - '\'
     flq:                                              SourceFilename - 'usbser.sys'
     flq:                                              TargetDirectory- 'C:\Windows\system32\DRIVERS'
     flq:                                              TargetFilename - 'usbser.sys'
     flq:                                         {FILE_QUEUE_COPY exit(0x00000000)}
     flq:                                    {FILE_QUEUE_COPY exit(0x00000000)}
     inf:                               {Install Inf Section [DriverInstall.NT] exit (0x00000000)}
     dvi:                               Processing co-installer registration section [DriverInstall.NT.CoInstallers].
     inf:                               {Install Inf Section [DriverInstall.NT.CoInstallers]}
     inf:                               {Install Inf Section [DriverInstall.NT.CoInstallers] exit (0x00000000)}
     dvi:                               Co-installers registered.
     dvi:                               {Install INTERFACES}
     dvi:                                    Installing section [DriverInstall.NT.Interfaces]
     dvi:                               {Install INTERFACES exit 00000000}
     dvi:                          {Install FILES exit (0x00000000)}
     dvi:                     Default installer: Exit
     dvi:                {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 20:49:33.438
     ndv:                Pruning file queue...
     dvi:                {_SCAN_FILE_QUEUE}
     flq:                     ScanQ flags=620
     flq:                          SPQ_SCAN_PRUNE_COPY_QUEUE
     flq:                          SPQ_SCAN_FILE_COMPARISON
     flq:                          SPQ_SCAN_ACTIVATE_DRP
     flq:                     ScanQ number of copy nodes=1
!    sig:                     GetNameSDInfo
!    sig:                     Error 0: The operation completed successfully.
     flq:                     ScanQ action=200 DoPruning=32
     flq:                     ScanQ end Validity flags=620 CopyNodes=1
     dvi:                {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
     ndv:                Committing file queue...
     flq:                {_commit_file_queue}
     flq:                     CommitQ DelNodes=0 RenNodes=0 CopyNodes=1
     flq:                     {SPFILENOTIFY_STARTQUEUE}
     flq:                     {SPFILENOTIFY_STARTQUEUE - exit(0x00000001)}
     flq:                     {_commit_copy_subqueue}
     flq:                          subqueue count=1
     flq:                          {SPFILENOTIFY_STARTSUBQUEUE}
     flq:                          {SPFILENOTIFY_STARTSUBQUEUE - exit(0x00000001)}
     flq:                          source media:
     flq:                               SourcePath   - [C:\Windows\System32\DriverStore\FileRepository\mdmcpq.inf_x86_neutral_9f203c20b6f0dabd]
     flq:                               SourceFile   - [usbser.sys]
     flq:                               Flags        - 0x00000000
     flq:                          {SPFQNOTIFY_NEEDMEDIA}
     flq:                               {SPFILENOTIFY_NEEDMEDIA}
     flq:                               {SPFILENOTIFY_NEEDMEDIA - exit(0x00000000)}
     flq:                          {SPFQNOTIFY_NEEDMEDIA - returned 0x00000000}
!!!  flq:                          source media: SPFQOPERATION_ABORT.
!!!  flq:                          Error 2: The system cannot find the file specified.
     flq:                     {_commit_copy_subqueue exit(0x00000002)}
!!!  flq:                     FileQueueCommit aborting!
!!!  flq:                     Error 2: The system cannot find the file specified.
     flq:                     {SPFILENOTIFY_ENDQUEUE}
     flq:                     {SPFILENOTIFY_ENDQUEUE - exit(0x00000001)}
     flq:                {_commit_file_queue exit(0x00000002)}
     ndv:                Device install status=0x00000002
     ndv:                Performing device install final cleanup...
!    ndv:                Queueing up error report since device installation failed...
     ndv:           {Core Device Install - exit(0x00000002)} 20:49:33.493
     dvi:           {DIF_DESTROYPRIVATEDATA} 20:49:33.494
     dvi:                Class installer: Enter 20:49:33.495
     dvi:                Class installer: Exit
     dvi:                Default installer: Enter 20:49:33.497
     dvi:                Default installer: Exit
     dvi:           {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 20:49:33.499
     ump:           Server install process exited with code 0x00000002 20:49:33.505
     ump:      {Plug and Play Service: Device Install exit(00000002)}
     ndv:      Device Install failed for new device...installing NULL driver.
     dvi:      {Plug and Play Service: Device Install for USB\VID_2341&PID_0043\75232303135351F03230}
     ump:           Creating Install Process: DrvInst.exe 20:49:33.525
!    ndv:           Installing NULL driver!
     dvi:           Set selected driver complete.
     dvi:           {DIF_ALLOW_INSTALL} 20:49:33.572
     dvi:                No class installer for 'δ֪'
     dvi:                No CoInstallers found
     dvi:                Default installer: Enter 20:49:33.576
     dvi:                Default installer: Exit
     dvi:           {DIF_ALLOW_INSTALL - exit(0xe000020e)} 20:49:33.579
     dvi:           {DIF_INSTALLDEVICE} 20:49:33.580
     dvi:                No class installer for 'δ֪'
     dvi:                Default installer: Enter 20:49:33.584
!    dvi:                     Installing NULL driver!
     dvi:                     Writing common driver property settings.
!    dvi:                     Failed to set Device Description property: (null)
!    dvi:                     Error 1784: The supplied user buffer is not valid for the requested operation.
     dvi:                     {Restarting Devices} 20:49:33.628
     dvi:                          Restart: USB\VID_2341&PID_0043\75232303135351F03230
     dvi:                          Restart complete.
     dvi:                     {Restarting Devices exit} 20:49:33.708
     dvi:                Default installer: Exit
     dvi:           {DIF_INSTALLDEVICE - exit(0x00000000)} 20:49:33.712
     ump:           Server install process exited with code 0x00000000 20:49:33.719
     ump:      {Plug and Play Service: Device Install exit(00000000)}
     ndv: {Update Driver Software Wizard exit(00000002)}
<<<  Section end 2013/01/18 20:49:45.154
<<<  [Exit status: FAILURE(0x00000002)]

